Integration of sewage treatment equipment integration of integrated wastewater treatment equipment of sewage treatment scheme

by:Jinwantong     2021-03-28
Many netizens in consulting about integration of sewage treatment equipment today small make up this site on the Internet to find five article about integration of sewage treatment equipment related information, please follow look small make up the integration of sewage treatment equipment is mainly refers to slaughter wastewater, in daily life such as kitchen, bathroom, shower room, laundry room amenities to remove waste water, because it contains sediment, grease, soap, food integrated sewage treatment equipment materials such as dust, bacteria, sundry, reflected on the water quality indexes, namely, biochemical oxygen demand ( BOD5) , chemical oxygen demand ( CODcr) And suspended solids ( SS) High content, high content of nitrogen, phosphorus, eutrophication if not treated, directly discharged into water body ( Jiang, river, lake, sea and ground water) And soil, the high concentration of organic matter in the water and soil, and make the eutrophication of water and soil. Hydrolysis acidification pool 3. Journal of sedimentation tank 5. 污泥好氧消化池返回搜狐,查看更多一、一体化污水处理设备日常管理维护一体化污水处理设备的运行管理工作:管理人职责:需要有健全的一体化污水处理设备运行维修管理制度,并且编制年度维修计划以及备件、备品的购买计划负责选择购买设备、建账、调拨以及报废的管理,还需要编制一体化污水处理设备的图册或者档案,并负责提供更新、改造的设计方案,需要参与设备的改造一体化生活污水处理设备、大修以及更新工作,并且需要检查设备安全以及事故分析等运行人职责:最好制定一体化污水处理设备的职员岗位责任制,还有相应操作流程设备维修管理内容:制定完善的一体化污水处理设医院污水处理设备报价备的档案,比如说名称、性能、图纸、文件、运行日期、测试数据、维修记录等等,在日常使用中责任人需要检查一体化污水处理设备的维修保养,并且制定专业制度,拥有一体化污水处理设备的检修章程,比方说检修的验收标准、检修技术标准、检修的程序等,还需要建立备件、备品的制度等二、一体化污水处理设备A2O工艺一体化污水处理设备是集合各处理阶段为一整个箱体的设备,可以根据水量的多少设计设备大小,不仅减少了占地面还减少了开支一体化设备表面看起来都一样,但是内部采用的工艺不同,根据工艺不同设计不同的A2/O工艺是Anaerobic- 缺氧, Oxic, abbreviations are anaerobic - A lack of oxygen - Aerobic biological denitrification and phosphorus removal technology for the process integration of sewage treatment equipment efficiency generally can reach, BOD5 and SS was 90% ~ 95%, and for more than 70% of the total nitrogen, phosphorus is approximately 90%, generally applicable to the requirements of nitrogen and phosphorus large integrated medium-sized urban sewage of the sewage treatment equipment manufacturer, factory but A2 / O process of capital expenditure and running cost are higher than normal activated sludge process, operation and management demand is high, so for now the situation of our country, after the treatment of sewage water closed or slow flow water bodies cause eutrophication of water body, which affect water supply water, to adopt the technology integration of three, integrated wastewater treatment equipment integration of sewage treatment scheme integrated wastewater treatment equipment adopted a biotechnology and membrane technology with the combination of high efficient biological water treatment technology, the technology is combined with biological membrane and the traditional sludge process of a kind of high efficient wastewater treatment technology, due to the effect of filtering of the biofilm, food processing wastewater treatment equipment creatures trapped in the bioreactor, achieve the complete separation of the hydraulic retention time and sludge age, to keep within the bioreactor high MLSS this company USES the 'lack of oxygen ( 一) + contact oxidation pool ( O) + tank 'combination process, equipment, water can reach the class a of integrated wastewater discharge standard GB8978 - 1996 level standard in contact oxidation period using the moving bed biofilm reactor ( Moving Bed Biofilm Reactor, MBBR) Process, which has high volume load, denitrification ability, low energy consumption, operation, maintenance is convenient wait for a few advantages of sewage sludge after precipitation, virus and e. coli index still meet emissions standards, at the end of the order to destroy viruses and e. coli, adding the chlorine disinfectants disinfection treatment, in the form of folded plate, relying on its own gravity, direct emissions near the municipal pipeline 4: sewage treatment equipment, disinfection integration pool disinfection pool contact time according to the standard for 30 min, special sewage can be extended to 1 - 1. 5 ht, generally using solid chlorine tablets disinfection ( According to customer's requirements with other disinfection device) , industrial organic wastewater treatment after the completion of discharge by eliminating four disinfecting pool, integrated wastewater treatment equipment introduced 2, AO biological treatment process of wastewater treatment equipment adopt push biological contact oxidation pool, its better than completely mixed or secondary and tertiary series full hybrid biological contact oxidation pool at the same time in the biological contact oxidation pool used the new elastic solid filler, it has a real big surface area, microbial membrane, membrane is convenient, under the condition of same organic load, higher than other fillers on the removal rate of organic matter
The CUSTOM approach to wastewater solutions is becoming increasingly popular; consequently, there is a surge in the demand for .
Helping our customers manage document workflow and increase efficiency through best-in-class CUSTOM and services. Fostering the growth and development of our employees.
But we do think that reckoning with supply chains of CUSTOM is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
You will have a wastewater solutions that looks wastewater solutions all the time, Because your is handling with it.
Qingdao Jinwantong Environmental Science and Technology Co., Ltd. agreed, noting that successful social marketing will become an even more important component of overall marketing strategies, and that marketers will have to think longer, harder and more creatively if they want to be able to fulfill the newly created potential of wastewater solutions.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...