Home  >  NEWS  >  Oil and gas water treatment system

Oil and gas water treatment system

2021-07-14

Remove oil and other pollutants in water

With our professionalism and patented technology, we can supply efficient, compact processing systems, remove oils and other pollutants in water to achieve the desired level required to facilitate disposal or reuse. Our custom design adaptation suits include delear hydraulic cyclone and air floating technology, as well as a range of filtration, desal, and corrugated plate interceptor (CPI) technology.


Debourque hydraulic cyclone and gas flotation

Debouring hydraulic cyclone oil production equipment


CPI Corrugated Plates Interceptor


Corrugated Plate Interceptor(CPI) a high efficient oil-water gravity separator, now is widely used in oily wastewater treatment to remove bulk oil from water.


Gravity separation is the most straightforward method of wastewater treatment and is, therefore, utilised widely in industries for separation of settling and/or floatable impurities from a carrier liquid.


CPI is one kind of high efficient oil-water gravity separator, now is widely used in oily wastewater treatment to remove bulk oil from water.


Gravity separation is the most straightforward method of wastewater treatment and is, therefore, utilized widely in industry for separation of settling and/or floatable impurities from a carrier liquid.


An enlarged separating surface can be achieved by placing various smaller planes on top of each other in the tank. If these planes are subsequently inclined in a tilted position, material separated between the plates is removed by the gravitational force. This is the principle on which the CPI corrugated plate pack is based.

In this plate pack the planes as referred to have been constructed in the shape of corrugated plates. They promote both the coalescence of the intercepted oil particles and, at the same time, their transfer through the plate pack.


If settleable material is present in the liquid, such material is collected and concentrated in the troughs of the corrugations so that it will slide down in the plate pack smoothly and easily.


Very small separating diameters can be obtained in the CPI system, because the disturbing factors, such as eddies and turbulences, which adversely affect large conventional separating tanks (e.g. API’s), are eliminated in the CPI.


The delear hydraulic cyclone can efficiently harvest oil from the water and other process fluid flow. Debouring hydrover has become standard oil production equipment, with the following features:


Compact

Cost-effective, low operating expenses

Low maintenance because there is no movable part

Highly stable performance

Proved technology

Suitable for floating systems


We offer a dehydrate fluid. Regardless of how far the operation is, there is a model that can be applied to your application:


Duplex stainless steel

Super double phase stainless steel

Tungstone® Tungsten Tungsten

Gas flotation achieves high efficiency dehydrate

Debouring hydraulic cyclone oil production equipment


The aerated flotation is a sufficiently proven oil production method in water treatment applications. JINWANTONG not only provides standard horizontal and vertical inducing filling flotation (IGF) and a solvent flotation (DAF) device, but also greatly improves the conventional technique by its bubble generation technology and compact flotation device (CFU).


Our compact flotation device CFU is particularly suitable for close-sea installation due to small area (horizontal and vertical) and a patented internal component aimed at reducing motion effects.


Whether your application is on the shore or offshore, our air flotation solutions provide:


Efficient dehydrate

Low export oil level

Simple, efficient operation and maintenance

Chemical consumption is low, even zero

Free rejected gas emissions

Minimum impact on the environment


Chat Online 编辑模式下无法使用
Chat Online inputting...